Floor sanding, gap filling of parquet flooring in Wembley
Before the works...
The merbau parquet flooring in this Wembley Property was overall looking tired and in desperate need of renovation. During our free survey, we did detailed inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor sanding, gap filling, of 30 sqm merbau parquet flooring and finishing the floors in matt Lacquer.
How we made it happen...
One of the challenges we experienced while working on this project, was the amount of furniture, which we had to work around in stages.
Parquet flooring renovation requires years of experience, skills and the right restoration equipment. Depending on the overall condition of the floors, the initial parquet floor sanding may start with coarser or medium grid. The aim of this step is not only to remove the previous finish and get the floors to bare wood, but also to provide a excellent level throughout the entire floor. Some older parquet floors may require more thorough work at this stage.
Next stage in the process of floor restoration was the application of the gap filling. We aim to apply resin filler in the end of the working day, so it settles properly overnight and in case it is needed we can repeat it on the following morning , if required. The resin gap filling is after that removed by next stages of the floor sanding process in medium grids .
Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the merbau timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.
The parquet flooring was consequently sealed with 1 coat of primer and 3 coats of Junckers HT700 Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.
