Wood Floor Sanding Company in Wembley | HA0

Flooring Advice?

Check our Flooring Guide, which offers various advice in topics like Wood Floor Finishing & Staining Wood Floor Sanding Stairs & Banisters Restoration , etc.

• Advice for Wooden Stairs Sanding & Restoration
• Parquet Flooring & Gap Filling
• Choosing between Varnishing or Oiling Your Wooden Floors
• How to Maintain Your Lacquered Wooden Floor
• What is the Difference Between Bona Mega & Bona Mega Natural Lacquer?

What Commercial Services We Do In Wembley?

For our business clients we offer professional commercial flooring services to the highest industry standards. We have already many local commercial floors in Wembley with excellent customer satisfaction rate. Today we continue to provide outstanding commercial flooring services to:

• Floor Renovation for Offices, Retail & Showrooms
• Floor Restoration for Restaurants & Pubs
• Floor Restoration for Churches & Community Halls
• Floor Restoration for Schools
• Floor Renovation Services for Museums, Galleries & Theatres

Whatever the type of flooring and whatever the need for flooring service, contact FloorWorks today, regardless of the size of the project.

See What Our Clients from Wembley Say About Us...

• ★★★★★

  Amazing + Expedient!

  Tyler Willis, business owner from New Barnet
• ★★★★★

  I would just like to say that they did a fantastic job. The guys were punctual and tidy and were very professional. Our floors look wonderful!

  Lily Perry, homeowner from Woodmansterne
• ★★★★★

  You guys are great workers! Thank you all.

  Lola Pierce, homeowner from Northwest London

Check Our Latest Flooring Advice Posts...

• What is the Difference Between Bona Mega & Bona Mega Natural Lacquer?
• Choosing between Varnishing or Oiling Your Wooden Floors
• Natural Unfinished Timber Look for Your Wooden Floors
• Floor Sanding - DIY or Hire a Professional Sanding Company
• How to Prepare My Home for Floor Sanding Service

Your Questions Answered..

• How many times I can restore my engineered wood floors?

  Hi Richard,

  There are 3 standards of thickness in engineered wood flooring - 20 mm, 18 mm and 14/15 mm. Each of those will have different thickness of top layer (oak, walnut, beech, maple, etc), which will vary between 3 mm and 6 mm.

  Every time engineered wood floors are sanded approx. 1 mm will be removed by the restoration itself, however another 1 mm should be allowed for difference factory defect difference and the level of the floor throughout.

  So, technically - 3 mm top layered floor can be sanded only once and a 6 mm top layer, should be able to achive 3 or even 4 restorations.

• What does polish mean and can it be done on engineered flooring?

  Hi and thank you for contacting us with your question about cleaning and polishing of engineered wood floors.

  The first thing that you need to be aware of is that cleaning and polishing service is not applicable for floors which are badly damaged and where the existing sealant has worn out. It is rather a service that is performed on wooden floors which are ina relatively good condition without any parches that do not have any sealant left and is merely done to provide an exrea coat and extra protection to the existing sealant. By doing this, cleaning and polishing can prolong the life of varnished floors before they need to be sanded and revarnished. Cleaning and poslishing can be done on any wooden floors which have been sealed with varnishi, including engineered wood flooring, parquet flooring and any solid wood floorings.

  Having said that, if the sealant on your floors has already worn out, then cleanign and polishing will not be possible and in this case a torough sanding and revarnishing will be required in order to completely remove the existing sealant and to apply new varnish on top of the sanded floros. 

• What can go wrong with DIY floor sanding?

  Hi,

  Doing floor restoration yourself might be a tricky thing to do unless you have some sanding experience and knowledge. Floor sanding requires particular skills which can only be obtained through experience. Therefore, we always recommend leaving the sanding of your parquet flooring to the experts like FloorWorks, who are experienced in sanding different types of flooring nad have the skills to avoid costy mistakes.

  However, if you are certain that you want to give it a try, make sure that you do some research about parquet floor sanding. One particular thing that you need to be aware of is the technique of proper allication of the wood floor finish. Once floors are sanded to a smooth finish, carefully apply the first coat of varnish, allowing sufficient time for it to dry before the next application of the following coat. Sometimes, when when the floor surface was not perfectly smooth and clean before the application of varnish or in cases where the existing sealant has not been entirely removed, blobs can appear after the sanding. This might be a very expensive thing to ractify as it would require an entire re-sanding and re-varnishing of the floors. Bear in mind that if your parquet flooring has already been sanded in the past, there might be a limited opportunity to re-sand agai, which may mean that an overall replacement of the flooring might be required.

  Therefore, it is always recommended to leave the parquet floor sanding to a professional sanding company like {{ organisation:name }}.

And Some Frequently Asked Questions...

• Can I book floor sanding service while I am away on business or holiday?

  While we do offer key collection and return service, we strongly advise that either yourself or a representative on your behalf is available when required for decisions related to colour, finish and furniture, which will require moving around by our team.

  Also, please note that while we take all reasonable care to ensure that your property is safe and secure, we are not responsible for guarding your property, particularly when there are other builders on site. Therefore, please make sure that you discuss any particular arrangements with us in advance if you are planning to be away during a floor sanding service.

• How long does it take before the floors can be used again after sanding service?

  During the restoration service, the floors can handle light traffic without disrupting the process.

  During the sealing process, the floors can be walked on between coats.

  After the final coat is applied, foot traffic can be handled after 2 hours for lacquered floors and (depending on air humidity / season) 5-8 hours for hardwax-oil.

  Furniture should go back in place on the following day.

• How many coats of lacquer are included in your service?

  For domestic floor sanding services, we apply 1 coat of primer followed by 2 coats of lacquer. You can choose from the available sheen options, which are extra-matt, matt, satin, and gloss.

  For floor sanding in public spaces (offices, schools, church halls), we use 1 coat of primer and 3 coats of high quality commercial-grade lacquer. Sheen options available are extra-matt, matt, and satin.

  Extra coats are available upon request, but we do not recommend more than 5 coats, including primer.

  The list of all floor finishes we use is available here.

Some Projects We Have Completed in Wembley

Floorworks® in Pictures...

Transform Your Space Today

Don't let tired and worn-out floors detract from the beauty of your space. With exceptional floor sanding services in Wembley, you can transform your floors and rejuvenate your home or business. Experience the difference that professional craftsmanship and expertise can make – revitalize your floors today!

FloorWorks in Northwest London...